Fingerprint and Face Attendance Devices: How to Connect Them to Payroll
Fingerprint or face recognition, three ways to sync punches, and a checklist before you buy attendance devices.
Fingerprint and face devices are the most common way to record attendance, but the device is only half the job. What matters is how punches get from the device into payroll without manual work.
Fingerprint or face recognition?
| Fingerprint | Face recognition | |
|---|---|---|
| Speed | About 1 second per punch | About 1 second, no touch |
| Best for | Offices, shops, clean environments | Factories, construction, hospitals, sites where hands are dirty or gloved |
| Hygiene | Shared touch surface | Contact-free |
| Weak points | Worn or wet fingers | Very bright outdoor light |
Many companies use both: face devices at the main gate and fingerprint devices in smaller branches. Brands such as ZKTeco and Anviz offer both types with an SDK that HR software can connect to.
Three ways to get punches into HR software
- USB export: someone copies a file from the device and imports it. Cheap, but slow and easy to forget.
- Scheduled sync: software pulls punches from the device every few hours over the network.
- Live sync: each punch reaches the HR system within seconds, so HR sees who is in now.
Live sync removes the import step entirely and is the only option that works well for many branches.
How LenvoHR helps: LenvoHR connects live to compatible ZKTeco, Anviz and other SDK devices. From one screen you can send employees to devices, set date and time, pull missing data and restart a device.
Checklist before you buy devices
- Does the device offer an SDK or push protocol your HR software supports?
- How many users and records does it store if the network goes down?
- Can you manage all branches from one place?
- Does it record the device ID, so you know where each punch came from?
- Is there local support for repairs and replacements?
From punch to payslip
A punch is only useful once it is matched to a shift. The HR system should link each punch to the right shift, including night shifts that cross midnight, then calculate lateness, early exit and overtime and send the totals to payroll.
Frequently asked questions
Can I keep my existing attendance devices?
Usually yes. Most ZKTeco and Anviz models with an SDK can be connected without replacing hardware.
What happens if the network goes down?
The device stores punches locally and sends them when the connection returns, so no records are lost.
Do I need a device in every branch?
For fixed sites, yes. For field staff, a mobile app with GPS check-in is usually a better fit.
Book a free demo and see your devices sync live with LenvoHR.